Convert Feet to Meters
Feet to meters helps you switch from the US and UK unit system to the metric system.
It is useful for height, room measurements, construction plans, and travel distances.
Quick Answer
1 Feet = 0.3048 Meters
Example, 5 feet = 5 × 0.3048 = 1.524 meters.
Example, 10 feet = 10 × 0.3048 = 3.048 meters.
Conversion Formula
meters = feet × 0.3048
This means you multiply the number of feet by 0.3048 to get the same length in meters.
- Write down the length in feet.
- Multiply it by 0.3048.
- The result is the length in meters.
What Is Feet
A feet is a unit of length used mainly in the US and sometimes in the UK, equal to 12 inches.
- Measuring a person’s height.
- Measuring room length and width.
- Construction and building plans.
- Measuring short distances in daily life.
- Sports fields and some equipment sizes.
What Is Meters?
A meters is the standard metric unit of length used in most countries, and it is part of the SI system.
- Measuring height and body length in many countries.
- Road signs and travel distances (often with kilometers).
- School science and math measurements.
- Measuring rooms, homes, and land in metric countries.
- Engineering, manufacturing, and design specs.
Real Life Examples
Here are common situations where converting feet to meters makes the number easier to use in metric measurements.
- A 6 foot tall person is about 1.83 meters tall.
- A 12 foot living room wall is about 3.66 meters long.
- A 3 foot table height is about 0.91 meters.
- A 25 foot swimming lane section is about 7.62 meters.
- A 100 foot walk to a mailbox is about 30.48 meters.
- A 15 foot ladder is about 4.57 meters.
- A 40 foot shipping container length is about 12.19 meters.
- A 8 foot ceiling height is about 2.44 meters.
Quick Tips
- Quick estimate, meters ≈ feet ÷ 3.28.
- For rough mental math, 10 feet is about 3 meters.
- Remember a common height, 6 feet ≈ 1.83 meters.
- For more accuracy, always use 0.3048 as the multiplier.
- Round sensibly, for room sizes, two decimal places is usually enough.
- If you only need an estimate, use 0.3 instead of 0.3048.